STEEL HEATING CONVECTORS

With a single heat exchanger

WITH MOUNTING ON BRACKETS OR SUPPORTS

 

  • Devices are intended for mounting on the walls with un even surfaces or in the conditions when the device  can not be installed right up to the wall because of fittings and tubes. The convectors can also be installed by means of special supports (they are supplied separately) on the floor surface.
  • Effective operation of the convectors when they are installed at some distance from the wall is ensured by the rear panel presence.

 

 

 

Heat carrier working temperature – up to 110  ̊C

Heat carrier excessive working pressure – up to 1,6 MPa

Excessive test pressure – 2,4 MPa

Ultimate strength – not less than 6,0 MPa

Connection – G ½ (internal thread)

Technical characteristics of the heating convectors

          Model         Height, cm Length, cm Depth, cm Distance between centres, cm Volume of the heat carrier, not over, dm3 Mass without the heat carrier, not over, kg
КСК-2 25/хх у КСК-2 40/хх у КСК-2 25/хх у КСК-2 40/хх у КСК-2 25/хх у КСК-2 40/хх у
КСК-2 25/30 К, КСК-2 40/30 К,П 25 40 36,2 36 8,5 7,5 0,34 5,15 5,4
КСК-2 25/40 К, КСК-2 40/40 К,П 46 45 0,42 6,45 6,8
КСК-2 25/60 К, КСК-2 40/60 К,П 65,6 65 0,58 9,25 9,5
КСК-2 25/80 К, КСК-2 40/80 К,П 85,2 85 0,75 12,15 12,2
КСК-2 25/100 К, КСК-2 40/100 К,П 104,8 105 0,9 15,05 14,9
КСК-2 25/120 К, КСК-2 40/120 К,П 124,4 124 1,06 17,75 17,7
КСК-2 25/140 К, КСК-2 40/140 К,П 144 143,3 1,22 20,85 20,4
КСК-2 25/160 К, КСК-2 40/160 К,П 163,6 163,2 1,38 23,85 23,1
КСК-2 25/180 К, КСК-2 40/180 К,П 183,2 183 1,74 26,15 25,8
КСК-2 25/200 К, КСК-2 40/200 К,П 202,8 202,5 1,92 29,25 28,5

 

Rated heat flow of the heating convectors at different values of the thermal head .

Model

Rated thermal head (heat rate), kW

30ºС (55/45/20)* 42,5ºС (70/55/20) 45ºС (70/60/20) 50ºС (75/65/20) 60ºС (90/70/20) 70ºС (95/85/20)
КСК-2 25/30 К 0,13 0,18 0,19 0,22 0,28 0,35
КСК-2 25/40 К 0,19 0,26 0,28 0,32 0,41 0,5
КСК-2 25/60 К 0,27 0,37 0,4 0,46 0,59 0,72
КСК-2 25/80 К 0,41 0,55 0,6 0,68 0,86 1,06
КСК-2 25/100 К 0,53 0,72 0,78 0,89 1,13 1,38
КСК-2 25/120 К 0,67 0,9 0,97 1,11 1,4 1,72
КСК-2 25/140 К 0,79 1,06 1,15 1,32 1,67 2,04
КСК-2 25/160 К 0,91 1,24 1,33 1,53 1,94 2,37
КСК-2 25/180 К 1,04 1,41 1,52 1,75 2,21 2,7
КСК-2 25/200 К 1,15 1,55 1,67 1,92 2,43 2,97

Rated heat flow of the heating convectors at different values of the thermal head .

Model

Rated thermal head (heat rate), kW

30ºС (55/45/20)* 42,5ºС (70/55/20) 45ºС (70/60/20) 50ºС (75/65/20) 60ºС (90/70/20) 70ºС (95/85/20)
КСК-2 40/30 К,П 0,17 0,23 0,25 0,29 0,37 0,45
КСК-2 40/40 К,П 0,23 0,31 0,34 0,39 0,49 0,60
КСК-2 40/60 К,П 0,42 0,47 0,51 0,58 0,74 0,90
КСК-2 40/80 К,П 0,47 0,63 0,68 0,78 0,98 1,20
КСК-2 40/100 К,П 0,58 0,78 0,84 0,97 1,23 1,50
КСК-2 40/120 К,П 0,70 0,94 1,01 1,16 1,47 1,80
КСК-2 40/140 К,П 0,78 1,02 1,13 1,36 1,72 2,10
КСК-2 40/160 К,П 0,93 1,26 1,35 1,55 1,96 2,40
КСК-2 40/180 К,П 1,05 1,41 1,52 1,74 2,21 2,70
КСК-2 40/200 К,П 1,16 1,57 1,69 1,94 2,45 3,00

Convectors modifications according to their connection are designated by the following indexes:

Кend

Пtransient

Complete set: steel convector, installation kit (in separate package), instruction, manual, supports for installing on the floor are delivered by a separate order.

Conventional designations:

КСК2-Н/xxy – steel heating convector «Термія» with wall mounting on brackets or on supports, where H  –  device height, y – modification variant.


We offer you to acquaint yourself with the:

сertificates of conformity

retail price-list

You can receive answers to all the questions you are interested in at the managers of the sales department

"Contacts"

Go back to the section HEATING RADIATORS