STEEL HEATING CONVECTORS

With a single heat exchanger and built-in thermal valve

WITH INSTALLATION ON BRACKETS OR SUPPORTS

 

 

  • Devices  are intended for mounting on the walls with uneven surfaces or in the conditions when the device can not be installed right up to the wall because of fittings and tubes. The convectors can also be installed by means of special supports (they are supplied separately) on the floor surface.
  • Effective operation of the convectors when they are installed at some distance from the wall is ensured by the rear panel presence.

 

 

Heat carrier working temperature – up to up to 110  ̊C

Heat carrier excessive working pressure – up to 1,5 MPa

Excessive test pressure – 1,5 MPa

Ultimate strength – not less than 6,0 MPa

Connection – G1/2 (internal thread)

Complete set: steel convector, installation kit (in separate package), operations manual.

Supports for installing on the floor are delivered by a separate order.

Technical characteristics of the heating convectors

         Model          Height, cm Length, cm Depth, cm Distance between centres, cm Volume of the heat carrier, not over, dm3 Mass without the heat carrier, not over, kg
КСК-2 25/30 КТ 25 39,7 8,5 7,5 0,34 5,2
КСК-2 25/40 КТ 49,5 0,42 6,5
КСК-2 25/600 КТ 69,1 0,58 9,3
КСК-2 25/80 КТ 88,7 0,75 12,2
КСК-2 25/100 КТ 108,3 0,9 15,1
КСК-2 25/120 КТ 127,9 1,06 17,8
КСК-2 25/140 КТ 147,5 1,22 20,9
КСК-2 25/160 КТ 164,1 1,38 23,9
КСК-2 25/180 КТ 186,7 1,74 26,2
КСК-2 25/200 КТ 206,3 1,92 29,3

Rated heat flow of the heating convectors at different values of the thermal head

Model

Rated thermal head (heat rate), kW

30ºС (55/45/20)* 42,5ºС (70/55/20) 45ºС (70/60/20) 50ºС (75/65/20) 60ºС (90/70/20) 70ºС (95/85/20)
КСК-2 25/30 КТ 0,13 0,18 0,19 0,22 0,28 0,35
КСК-2 25/30 КТ 0,19 0,26 0,28 0,32 0,41 0,5
КСК-2 25/30 КТ 0,27 0,37 0,4 0,46 0,59 0,72
КСК-2 25/30 КТ 0,41 0,55 0,6 0,68 0,86 1,06
КСК-2 25/30 КТ 0,53 0,72 0,78 0,89 1,13 1,38
КСК-2 25/30 КТ 0,67 0,9 0,97 1,11 1,4 1,72
КСК-2 25/30 КТ 0,79 1,06 1,15 1,32 1,67 2,04
КСК-2 25/30 КТ 0,91 1,24 1,33 1,53 1,94 2,37
КСК-2 25/30 КТ 1,04 1,41 1,52 1,75 2,21 2,7
КСК-2 25/30 КТ 1,15 1,55 1,67 1,92 2,43 2,97

Conventional designations:

КСК-2 25  хх КТ- steel heating convector «Термія» with wall mounting on brackets or on supports where xx – device length, КТ – modification.

Convectors modification variants according to their connection are designated by the following index:

КТ – end with a thermal value.


We offer you to acquaint yourself with the:

сertificates of conformity

retail price-list

You can receive answers to all the questions you are interested in at the managers of the sales department

"Contacts"

Go back to the section HEATING RADIATORS