STEEL HEATING CONVECTORS

With a single heat exchanger for upper mounting

WITH MOUNTING ON BRACKETS OR ON SUPPORTS

  • Devices are designed for mounting on the walls with uneven surfaces or in condition when the device can not be installed right up to the wall because of fittings and tubes.
  • Effective operation of the convectors when they are installed at a distance from the wall is ensured by the rear panel presence.
  • They are used for mounting on high level on lift platforms, on landings and flights, on the ways of evacuation exits without reducing the standard width of the way.

 

Heat carrier working temperature – up to up to 110  ̊C

Heat carrier excessive working pressure – up to 1,6 MPa

Excessive test pressure – 2,4 MPa

Ultimate strength – not less than 6,0 MPa

Connection – G1/2 (internal thread)

Complete set: steel convector, installation kit (in separate package), instruction manual. Supports for mounting on the floor are delivered by a separate order.

Technical characteristics of the heating convectors:

Model Height, cm Length, cm Depth, cm Distance between centers, cm Volume of the heat carrier, not over, dm3 Mass without the heat carrier, not over, kg
КСК-2 25/30 К1 25 35,4 8,5 7,5 0,34 4,2
КСК-2 25/40 К1 45,2 0,42 5,2
КСК-2 25/60 К1 64,8 0,58 7,5
КСК-2 25/80 К1 84,4 0,75 9,7
КСК-2 25/100 К1 104 0,9 12
КСК-2 25/120 К1 123,6 1,06 13,2
КСК-2 25/140 К1 144,2 1,22 16,4
КСК-2 25/160 К1 162,8 1,38 18,5
КСК-2 25/180 К1 182,4 1,74 20,7
КСК-2 25/200 К1 202 1,92 23

Rated heat flow of the heating convectors at different values of the thermal head

Model

Rated thermal head (heat rate), kW

30°С (55/45/20)* 42,5°С (70/55/20) 45°С (70/60/20) 50°С (75/65/20)

60°С (90/70/20)

                           70°С (95/85/20)
КСК-2 25/30 К1 0,13 0,18 0,19 0,22 0,28 0,35
КСК-2 25/40 К1 0,19 0,26 0,28 0,32 0,41 0,5
КСК-2 25/60 К1 0,27 0,37 0,4 0,46 0,59 0,72
КСК-2 25/80  К1 0,41 0,55 0,6 0,68 0,86 1,06
КСК-2 25/100 К1 0,53 0,72 0,78 0,89 1,13 1,38
КСК-2 25/120 К1 0,67 0,9 0,97 1,11 1,4 1,72
КСК-2 25/140 К1 0,79 1,06 1,15 1,32 1,67 2,04
КСК-2 25/160 К1 0,91 1,24 1,33 1,53 1,94 2,37
КСК-2 25/180 К1 1,04 1,41 1,52 1,75 2,21 2,7
КСК-2 25/200 К1 1,15 1,55 1,67 1,92 2,43 2,97

* - thermal heat value at the devices inlet and outlettemperature 55̊ C and 45̊ C correspondingly and at the air temperature in the heating room 20̊ C. This determination of the thermal head is valid and for its other values.

Conventional designations:

КСК 40 /хх К1 y – steel heating convector «Термія» with wall mounting or supports, where xx – device length, K1 – modification variant.

Convectors modification variants according to their connection are designated by the following index:

K – end.


We offer you to acquaint yourself with the:

сertificates of conformity

retail price-list

You can receive answers to all the questions you are interested in at the managers of the sales department

"Contacts"

Go back to the section HEATING RADIATORS