STEEL HEATING CONVECTORS

With a double on the horizontal heat exchanger  and with a built-in thermal valve

WITH MOUNTING ON BRACKETS OR ON SUPPORTS

  • Devices are intended for mounting on the walls with uneven surfaces or in the conditions when the device can not be mounted right up to the wall because of tubes and fittings. The convectors can also be installed by means of special supports (they are delivered separately)on the floor surface.
  • Effective operation of the convectors when they are mounted at a distance from the wall is ensured by the rear panel presence.
  • The nomenclature presents the devices of customary and antivandal (AV) modification of the case.

 

Heat carrier working temperature – up to up to 110  ̊C

Heat carrier excessive working pressure – up to 1,6 MPa

Excessive test pressure – 2,4 MPa

Ultimate strength – not less than 6,0 MPa

Connection – G1/2 (internal thread)

Complete set: steel convector, installation kit (in separate package), operations manual. Supports for mounting on the floor are delivered by a separate order.

Technical characteristics of the heating convectors

          Model         Height, cm Length, cm Depth, cm Distance between centers, cm Volume of the heat carrier, not over, dm3 Mass without the heat carrier, not over, kg
КСК-2 40/30 НБТ 2Г 40 37,5 16 9,0 0,7 9,8
КСК-2 40/40 НБТ 2Г 47,3 0,84 10,8
КСК-2 40/60 НБТ 2Г 66,9 1,2 15,3
КСК-2 40/80 НБТ 2Г 86,5 1,5 19,8
КСК-2 40/100 НБТ 2Г 106,1 1,8 24,2
КСК-2 40/120 НБТ 2Г 125,7 2,12 28,7
КСК-2 40/140 НБТ 2Г 145,3 2,44 33,0
КСК-2 40/160 НБТ 2Г 164,9 2,76 41,8
КСК-2 40/180 НБТ 2Г 184,5 3,08 46,2
КСК-2 40/200 НБТ 2Г 204,1 3,4 47,4

Rated heat flow of the heating convectors at different values of the thermal head

           Model        

Rated thermal head (heat rate), kW

30ºС (55/45/20)*

42,5ºС (70/55/20)

45ºС (70/60/20)

50ºС (75/65/20)

60ºС (90/70/20)

70ºС (95/85/20)

КСК-2 40/30 НБТ 2Г 0,23 0,32 0,34 0,39 0,5 0,61
КСК-2 40/40 НБТ 2Г 0,34 0,46 0,5 0,57 0,73 0,89
КСК-2 40/60 НБТ 2Г 0,57 0,78 0,84 0,96 1,22 1,49
КСК-2 40/80 НБТ 2Г 0,8 1,08 1,17 1,34 1,69 2,07
КСК-2 40/100 НБТ 2Г 1,02 1,38 1,49 1,71 2,16 2,64
КСК-2 40/120 НБТ 2Г 1,23 1,67 1,8 2,07 2,61 3,19
КСК-2 40/140 НБТ 2Г 1,46 1,98 2,14 2,46 3,1 3,79
КСК-2 40/160 НБТ 2Г 1,7 2,29 2,48 2,85 3,59 4,39
КСК-2 40/180 НБТ 2Г 1,91 2,58 2,79 3,2 4,05 4,94
КСК-2 40/200 НБТ 2Г 2,12 2,87 3,1 3,5 4,5 5,49

* - thermal heat value at the devices inlet and outlettemperature 55̊ C and 45̊ C correspondingly and at the air temperature in the heating room 20̊ C. This determination of the thermal head is valid and for its other values.

Conventional designations:

КСК 40 /хх yT 2Г – steel heating convector «Термія» with mounting on brackets or on supports with a double on the horizontal heat exchanger (2Г) with a built-in thermal valve (T), where xx – device length, y – modification variant.

Convectors modification variants according to their connection are designated by the following index:

НБ – lower lateral.


We offer you to acquaint yourself with the:

сertificates of conformity

retail price-list

You can receive answers to all the questions you are interested in at the managers of the sales department

"Contacts"

Go back to the section HEATING RADIATORS